Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
61626364656667686970
62
Enable: This option is used to enable the alarm feature.
Protocol Type: The default protocol type will be Alarm Center
Host IP: The IP address of the device.
Host IP: The IP address of the connected alarm device.
Port: The port number used of the connected alarm device.
Self-Report Time: These dropdown menus are used to set a date and time for the alarm to be triggered.
To confirm settings, click the Apply button near the bottom right hand corner. Click the Back button to
exit the interface.
Register
The Register menu allows the user to register to a proxy to the system which allows the user to access
the NVR via a specified proxy. Please note, this section only supports, IPv4 server IP addresses.
Below is a screenshot of the Register menu: