User Manual
76
Enable: Enable snapshots to be recorded or sent from the system.
Disable: Disable snapshots from being recorded or sent from the system.
To confirm settings, click the Apply button near the bottom right hand corner. Click the Back button to
exit the interface.
Advanced
This screen allows the user to set and group corresponding HDD and image settings.
Below is a screenshot of the channel menu:
HDD
This tab allows the user to set HDD groups and setup operations for mainstream, sub stream, and
snapshot operations.
Note: This feature may not be available in all models and may be applicable to only certain model NVRs
Main Stream
The Mainstream interface allows the user set corresponding HDD group to save to the mainstream
configuration of a connected device. Below is a screenshot of the mainstream channel interface: