QUICK SETUP GUIDE WELCOME TO EXCEPTIONAL PERFORMANCE. FOR AMD RADEON™ PRO W6000 SERIES GRAPHICS CARDS Professional Graphics for Exceptional Performance with Reliability, Stability and Software Certifications at its Core.
NAVIGATION TIP: Use the icon to quickly jump back to this page.
GETTING STARTED Before You Begin... Recording the Serial and Part Numbers Before you begin installing your new AMD Radeon™ PRO graphics card, visually inspect the card and any components that may have shipped with it, and contact your AMD reseller in the event of missing or damaged parts. Also make sure that you have the correct system requirements and have reviewed the preinstallation information outlined below. Write down the serial number and part number before installing your product.
IMPORTANT SAFETY INSTRUCTIONS Installation and servicing of computer components, and creating customized computer mods can be hazardous. Only trained, qualified personnel should install, repair or service computer components or create customized mods.Please ensure that before working on computer components that the computer is unplugged and that all components have been fully discharged. Be sure to ground yourself before touching sensitive components which can be damaged by static discharge.
HARDWARE & SOFTWARE INSTALLATION Installation Overview Using the Unattached End Bracket. (AMD Radeon™ PRO W6400 GPU Only.) Once you have determined that your system meets the recommended minimum requirements, perform the following tasks to install your new graphics card. The AMD Radeon™ PRO W6000 card is designed for flexibility and ease of mounting into your choice of a new or existing workstation.
HARDWARE & SOFTWARE INSTALLATION Installing the Graphics Card CAUTION: Wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral cable or removing a component from the motherboard to avoid possible damage to the motherboard. Fig. 03 Power Connection Location A. Power supply Detailed installation instructions are provided on the following page. 1. Turn off and disconnect your computer system from power. 2. If needed, remove any existing graphics card(s). 3.
HARDWARE & SOFTWARE INSTALLATION 10 Easy Steps to Installing the Graphics Card 1. Turn off the computer, and disconnect its power cable. 6. If your card requires auxiliary power and must be connected directly to the power supply, locate the appropriate power connector cable(s) from the power supply and connect it (or them) to the graphics card’s auxiliary power connector(s). 2. Remove the cover to the computer’s case. PRO TIP: If necessary, consult the computer manual for help in removing the cover.
HARDWARE & SOFTWARE INSTALLATION Radeon™ PRO Drivers and Software Drivers are small but important programs that enable an operating system to communicate with a piece of hardware, such as a graphics card. When you install a new graphics card, you must also install the appropriate driver, in this case the AMD Radeon™ PRO W6000 series driver and configuration software for your card to take full advantage of the capabilities of your GPU.
DISPLAY CONFIGURATIONS Fig. 04 Mini-DisplayPort™ and Full Size DisplayPort™ Connections: Connecting Displays The AMD Radeon™ PRO W6000 series graphics card provides support for up to 8K Ultra High-Definition (UHD) resolutions via its DisplayPort™ connections [Fig. 04]. Depending on the model of the graphics card, up to six displays can be simultaneously supported via the onboard DisplayPort™ connections. Non-DisplayPort™ devices may be connected using adapter cables.
DISPLAY CONFIGURATIONS The following table lists options for attaching displays to your graphics card: Display Configuration Connection Options CRT (VGA) display DisplayPort™ connection with DisplayPort™-to-VGA adapter DFP (digital flat-panel) display DisplayPort™ connection with DisplayPort™ cable DisplayPort™ connection with DisplayPort™-to-DVI adapter HDMI™ DisplayPort™ connection with DisplayPort™-to-HDMI adapter PRO TIP: Display connector types: Mini DisplayPort™ DisplayPort™ DVI-D VGA HD
NEED ADDITIONAL HELP? AMD Customer Care Disclaimer AMD Customer Care for Graphics Products will work to resolve your issue and help you to get your product up and running. If your issue is not resolved, our technicians will determine whether the difficulty you are experiencing is the result of the product, whether your product contains a defect, and whether your product is under warranty. The information contained herein is for informational purposes only, and is subject to change without notice.
COMPLIANCE INFORMATION FCC Compliance Information (USA) ISED Compliance Information (Canada) Class B This product complies with FCC Rules Part 15. Operation is subject to the following conditions: Class B This Class B digital apparatus complies with Canadian ICES-003: CAN ICES-3(B)/NMB-3(B). Cet appareil numérique de la Classe A est conforme à la norme CAN ICES-3(B)/NMB-3(B) du Canada. • This device may not cause harmful interference.
KEEP UP TO DATE Register to receive the latest news direct to your inbox at: AMD.com/ProGPUsignup This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © 2022 Advanced Micro Devices, Inc. All rights reserved.
