User Guide

Chapter 2
23
COM 2 (Serial port / COM Headers)
This is an addition 9-pin connector is for a serial port ribbon cable. This will allow
you to enable an additional COM Port.
IR2 (IR & CIR Connector):
Select a UART Mode in BIOS's Integrated Peripherals menu the UART port to
support IR function. (See section 3 Super I/O Device of Integrated Peripherals)
Chapter 3
24
Chapter 3 BIOS Setup Program
Phoenix-Award BIOS ROM has a built-in setup program that allows users to modify
the basic system configuration. This information is stored in CMOS RAM so that it
can retain the setup information, even when the power is turned off.
To enter the Phoenix-Award BIOS setup program press the [Delete key] when you
Power on or reboot the computer system. The primary screen as shown in Figure
3-1 is a list of the menus and functions available in the setup program. Select the
desired item by your arrow keys and press enter to make the changes. Operating
commands are located at the bottom of this and all other BIOS screens. When a field
is highlighted, on-line help information is displayed on the right side of the screen.
Figure 3-1 Setup Program Initial Screen