User guide

Backplate Connections

Figure 2–2 ATI TV Wonder™ 650 Backplate

The following connections are available on the backplate of your tuner card:

1 DTV/FM. FM Radio and Digital TV antenna coaxial connection

2 TV. Cable TV Coaxial Connection

3 AV IN. Audio/video connection (to purple adapter)

Hardware Installation

To install your hardware:

1. Turn off the computer, monitor, and other peripheral devices.

2. Unplug the computer's power cord, and disconnect all cables from the back

of your computer.

Caution:

Wait approximately 20 seconds after unplugging the power cord before

disconnecting a peripheral or removing a component from the

motherboard to avoid possible damage to the motherboard.

3. Remove the computer cover. If necessary, consult your computer's manual

for help in removing the cover.

Caution:

Remember to discharge your body's static electricity by touching the

power supply or the metal surface of the computer chassis before touching

the motherboard or components.

4. Locate an available PCI slot and, if necessary, remove the metal back-plate

cover.

5. Align your card with the slot, then press the card in firmly until it is fully

seated.

6. Screw in or fasten the card securely and replace your computer cover.

7. Reconnect any cables you have disconnected, and then plug in the

computer’s power cord.

8. Attach a TV antenna or coaxial cable to the TV connector on your

ATI TV Wonder™ 650.

Installation

P/N 117-70420-00