User manual

SRPM24
Commands Set List
User EXEC D
Privileged EXEC E
Global configuration C
PoE P
UPS U
System Commands Set
Commands Level Description Example
show system-info
D
Shows system information SRPM24>show system-info
show version
D
Shows version information SRPM24>show version
show config
D
Shows device configuration SRPM24>show config
show terminal
E
Shows console information SRPM24#show terminal
write memory
C
Save user configuration into
permanent memory (flash
rom)
SRPM24#write memory
write terminal
C
Displays user configuration
on terminal
SRPM24#write terminal
system name
[System Name]
C
Configure system name SRPM24(config)#system name xxx
system location
[System Location]
C
Set device system location
string
SRPM24(config)#system location xxx
system description
[System Description]
C
Set device system
description string
SRPM24(config)#system description xxx
show system-info
D
Shows system information SRPM24>show system-info
ip address
[Ip-address] <space>
[Subnet-mask] <space>
[Gateway]
C
Configure the IP address of
the device
SRPM24(config)#ip address 192.168.1.1
255.255.255.0 192.168.1.254
ip dhcp
[Enable|Disable]
C
Enable DHCP client function
of the device
SRPM24(config)#ip dhcp enable
reload
C
Reboot the device SRPM24(config)#reload
17