MSDS

Verification Report No.: GZ0807123344/CHEM Date: JUL 14, 2008 Page 8 of 19
(supplementary)
Remark
(1) (a) It is the result on total Br while test item on restricted substances is PBBs/PBDEs. It is the result on total Cr
while test item on restricted substances is Cr
6+
.
(b) Results are obtained by EDXRF for primary screening, and further chemical testing by ICP (for Cd, Pb, Hg),
UV-VIS (for CrVI) and GCMSD (for PBBs, PBDEs) is recommended to be performed, if the concentration
exceeds the below warning value according to IEC 62321/2nd CDV (111/95/CDV) (unit: mg/kg)
Element Polymer Metal Composite Materials
Cd BL≤ (70-3σ)< X <(130+3σ)≤ OL BL≤ (70-3σ)< X <(130+3σ)≤ OL LOD < X <(150+3σ)≤ OL
Pb BL≤ (700-3σ)< X <(1300+3σ)≤ OL BL≤ (700-3σ)< X <(1300+3σ)≤ OL BL≤ (500-3σ)< X <(1500+3σ)≤ OL
Hg BL≤ (700-3σ)< X <(1300+3σ)≤ OL BL≤ (700-3σ)< X <(1300+3σ)≤ OL BL≤ (500-3σ)< X <(1500+3σ)≤ OL
Br BL ≤ (300-3σ)< X --- BL≤ (250-3σ)< X
Cr BL ≤ (700-3σ)< X BL ≤ (700-3σ)< X BL≤ (500-3σ)< X
(c) OL = Over Limit, BL = Below Limit, IN = Inconclusive, LOD = Limit of Detection
(d) The XRF screening test for RoHS elements – The reading may be different to the actual content in the
sample be of non-uniformity composition
(2) (a) mg/kg = ppm=0.0001%, N.D. = not detected (<MDL), --- = not conducted, \ = not available.
(b) Unit and Method Detection Limit (MDL) in wet chemical test
Test Items Pb Cd Hg
Units mg/kg mg/kg mg/kg
MDL 2 2 2
The MDL for single compound of PBBs & PBDEs is 5 mg/kg and MDL of Cr
6+
for polymer & composite
sample is 2 mg/kg.
(c) According to IEC 62321/2nd CDV (111/95/CDV), result on Cr
6+
for metal sample is shown as
Positive/Negative. Negative = Absence of Cr
6+
coating, Positive = Presence of Cr
6+
coating
(d) ## = The exemption of DecaBDE in polymeric application according 2005/717/EC was overruled by the
European Court of Justice by its decision of 01.04.2008. Subsequently DecaBDE will be included in the
sum of PBDE after 01.07.2008.
(3) Results & photo(s) of this report refer to test report GZ0805078919/CHEM.