Owner manual

8
1
Connect hose coupling to outlet on
the extinguisher. Lay hose straight
on ground to its full 50 ft. length.
Start first regular loop counter-
clockwise by placing between side
brackets and over the top bracket.
2
The second loop is a REVERSE
loop. Notice that the hose passes
behind the loop on this reverse
loop.
If instructions are
followed, the hose will uncoil
without kinks.
3
The next loop is a regular "hose in
front" loop. Succeeding loops are
alternated: reverse, front, reverse,
etc. for six full loops.
4
Adjust the loops so that the nozzle
fits into the nozzle mount. Loops
should be approximately the same
size.
Guide to Proper Installation of Hose on
Wheeled or Stationary Fire Extinguishers