Item Brochure

PN 05616 04/2020
INSTALLATION
Your plant layout and particular hazards dictate the placement of fire extinguishers. Do not place this
extinguisher close to a potential fire hazard. Amerex recommends location no less than a 50-foot
distance from a potential hazard while leaving an unobstructed access. Avoid placing it in an extremely
hot or cold place. The operational temperature range for this extinguisher is -65º to +120ºF (-54º to
+49ºC). The extinguisher shall be adequately protected if temperatures outside of this range are
anticipated. Keep the extinguisher clean and free from dirt, ice, chemicals and any contaminants that
may interfere with its proper operation. Do not functionally test this fire extinguisher. (Testing or any
use may cause the extinguisher to gradually lose pressure and become ineffective.)
OPERATION
NOTE: Persons expected to use this extinguisher shall be trained in initiating its
operation and in the proper fire-fighting technique. Familiarize all personnel
with this information before an emergency occurs.
1. Remove extinguisher from wall hanger or vehicle bracket.
2. Hold the extinguisher upright, twist and pull the pull pin, snapping the tamper seal.
3. Stand back 15 feet from the fire and aim the nozzle at the base of flames nearest you.
4. Sweep side to side across the base of the fire and past both edges. Progressively follow up until the fire
is extinguished. Work the fire away from you while being alert for flashbacks. Move closer as the fire
is extinguished but not so close as to scatter or splash the burning materials.
5. When the fire is out, stand by and watch for possible reignition. Evacuate and ventilate the area
immediately after extinguishing the fire. The fumes and smoke from any fire may be hazardous and can
be deadly.
DISCHARGE TIME – VARIES ACCORDING TO THE MODEL
EFFECTIVE RANGE OF AGENT THROW – 040-50 feet.