ELMC-1 Professional Digital Producer Featuring: User Guide and Reference Manual 4/13
CONTENTS SAFETY PRECAUTIONS........................................................................................................................3 ELECTRICAL PRECAUTIONS................................................................................................................4 SAFETY INSTRUCTIONS.......................................................................................................................5 UNPACKING.............................................................................
IMPORTANT SAFETY PRECAUTIONS IMPORTANT SAFETY ITEMS FOR U.S.A. & CANADA MODEL ONLY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS Media Controller TO WATER OR MOISTURE CAUTION: 1. Handle the power supply cord carefully. Do not damage or deform; it may cause electric shock or malfunction when used. Hold plug attach- ment when removing from wall outlet. Do not pull on the cord. 2. To avoid electric shock, do not open the top cover when the unit is plugged in.
ELECTRICAL SAFETY PRECAUTIONS ELECTRICAL PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
SAFETY INSTRUCTIONS I. Read Instructions - All the safety and operating instructions should be read before the Player is operated. The safety and operating instructions should be saved for future reference. 2. Heed Warnings - All warnings on the Player and in the operating instructions should be adhered to. 3. Water and Moisture - The player should not be used near water - for example, near a bath tub, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc. 4.
UNPACKING Every ELMC-1 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your player for any damage and be sure all equipment necessary to operate the player has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions.
MAIN FEATURES • • • MIDI Control Master Volume Control Crossfader • • • Seamless Loop (uninterrupted loop playback) 3 Band EQ Durable Touch Sensitive Jog Wheel MINIMUM SYSTEM REQUIREMENTS* PC Requirements: • Windows XP Sp2 or Windows Vista (32-bit & 64-bit supported) • PIV 1.2GHz Computer (SSE2 CPU), AMD 64 or Greater • 1024_768 SVGA Video • 2 GIG RAM (Vista) • 40MB Free on the Hard-Drive (Recommended 2000MB) • DirectX 9.0 Mac Requirements: • Mac OS X 10.
GENERAL FUNCTIONS AND CONTROLS Figure 1 1 2 12 3 4 11 5 10 9 8 7 6 A. PLAYER - FRONT (FIGURE 1) 1. (-) PITCH BEND BUTTON - The (-) pitch bend function creates a momentary “Slow Down” in the BPM’s (Beats per minute) while it is playing. This will allow you to match the beats between two playing audio sources. Remember, this is a momentary function. When you remove your finger from the pitch button, the BPM’s will automatically return to the set pitch value.
GENERAL FUNCTIONS AND CONTROLS (Cont.) effect window in Virtual DJ, press the knob to activate the effect. Once an effect is active, this knob will temporarily control the effect parameter till the effect is deactivated. Press the knob to deactivate the effect. SAMPLER SELECT - Holding SHIFT while turning this knob will set the sampler on in the sam- ple window. Rotate the knob left or right once the the desired effect is found. Start/Stop the sampler by pressing the knob.
GENERAL FUNCTIONS AND CONTROLS (Cont.) 6. LOOP - This button will set a 4 beat loop and activate loop divide and multiply functions on the FX select knob. 7. PLAY/PAUSE BUTTON - Press this button to PLAY/PAUSE what ever music source is playing. 8. CUE - Pressing the CUE button during playback immediately pauses playback and returns the track to the last set cue point. The red CUE LED will glow when the unit is in cue mode. The LED will also flash every time a new CUE POINT is set.
COMPUTER CONNECTION 1. CONNECTING THE ELMC-1 TO YOUR PC Connect the ELMC-1 to your PC by using the USB ports located on the rear of the ELMC-1 and your PC. Connect the supplied USB cable to the USB port on the rear of the ELMC-1, and the other end connects to the USB port on your computer. NOTE: Before connecting your ELMC-1 to your computer or laptop, we highly recommend that you install the provided software.
CLEANING Due to fog residue, smoke, and dust, cleaning the mixer should be carried out periodically to residue build up. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Use a cleaner specially designed for electronics to spray in and around the knobs and switch. This will reduce small particle built up that can effect the proper operation of the mixer. 3. Cleaning should be carried out every 30-60 days to prevent heavy built up. 4.
WARRANTY WARRANTY INFORMATION: The ELMC-1 carries a ONE year (365 days) limited warranty. This warranty covers parts and labor. Please fill out the enclosed warranty card to validate your purchase and warranty. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American Audio® customer support at (800) 3226337 for a R.A.
NOTES ©American Audio® - www.americanaudio.
SPECIFICATIONS GENERAL Model: American Audio® ELMC-1 - PC Media Controller Dimensions: 399(L) x 300(W) x 40(H) mm 15.7"(L) x 12(W) x 1.5"(H) Place on flat surface or mount in flat case 10.9 Lbs. / 4.93 Kgs USB Installation: Weight: Power supply: CHECK THE AMERICAN AUDIO WEBSITE FOR DOWNLOADABLE USER SOFTWARE UPDATES. ©American Audio® - www.americanaudio.
©American Audio® World Headquarters: 6122 S. Eastern Ave., Los Angeles, CA 90040 USA Tel: 323-582-3322 Fax: 323-582-3311 Web: www.americanaudio.us E-mail: info@americanaudio.us American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands service@americandj.eu / www.americandj.