Specifications

PHONO inputs (All DJ turntable use MM pick-up cartridges). The red colored RCA jack represents

the right channel input and the white represents the left channel input. The output level for any device

connected to these input jacks will be controlled by FADER CHANNEL 2.

20. GND (GROUND TERMINAL) - These connections are used to ground the excess magnetic ﬂux of

phono turntables. Connect each of your turntables ground leads to either of the two ground terminals.

This will reduce the humming and popping noises associated with magnetic phono cartridges.

21. CHANNEL 1: LINE 1 RCA INPUT JACKS - These Jacks are used for line level inputs. Connect CD

players such as the American Audio® CDS-1™ or tape decks to LINE inputs. Line level musical instru-

ments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE

inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA jack represents

the right channel input and the white represents the left channel input. The output level for any device

connected to these input jacks will be controlled by FADER CHANNEL 1.

22. CHANNEL 1: PHONO 1 INPUT - Connect turntables equipped with MM pickup cartridge to

PHONO inputs (All DJ turntable use MM pick-up cartridges). The red colored RCA jack represents

the right channel input and the white represents the left channel input. The output level for any device

connected to these input jacks will be controlled by FADER CHANNEL 1.

23. PLAYER B CONTROL - This jack is used to control the “Q-Start” function between the mixer

and a compatible American Audio

® or American DJ® CD Player. Using the mini plug included with

your CD player, connect from the CD player controller out jack to this jack. Player B “Q-Start”

functionallity will be controlled by the right side of the CROSSFADER (8). For more information on

“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use

the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD

player.

24. PLAYER B CONTROL - This jack is used to control the “Q-Start” function between the mixer

and a compatible American Audio® or American DJ® CD Player. Using the mini plug included with

your CD player, connect from the CD player controller out jack to this jack. Player B “Q-Start”

functionallity will be controlled by the left side of the CROSSFADER (8). For more information on

“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use

the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD

player.

25. PLAYER A CONTROL - This jack is used to control the “Q-Start” function between the mixer

and a compatible American Audio® or American DJ® CD Player. Using the mini plug included with

your CD player, connect from the CD player controller out jack to this jack. Player A “Q-Start”

functionallity will be controlled by the left side of the CROSSFADER (8). For more information on

“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use

the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD

player.

Q-D1™ CONTROLS AND FEATURES CONT.