User`s manual

3
Rear Panel
3. Loop 1 IN. Input to loop 1. Loop 1 is isolated.
4. Loop 1 S. Send of loop 1. Connect to effect input.
5. Loop 1 R. Return of loop 1. Connect from effect output.
6. Loop 1 OUT. Output from loop 1.
7. Loop 2 IN. Input to loop 2. Loops 2-6 are internally chained together.
8. Loops 2-6 S. Send of loops 2-6. Connect to effect inputs.
9. Loops 2-6 R. Return of loops 2-6. Connect from effect outputs.
10. Main OUT. Main output from loop 6.
11. Power Jack. Requires 9VDC at 100mA or more using a standard 5.5x2.1mm
barrel connector, same as most pedal effects. See Power section on following
page if using phantom power.
12. MIDI IN. Receives MIDI commands, and provides phantom power for Voodoo
Lab Ground Control Pro or Commander foot controllers.
13. MIDI OUT. Echoes commands from MIDI IN for chaining additional MIDI
devices.