Owner`s manual

Bands
BandsALL
In this setting all radar, laser, and SWS
frequencies are monitored. This is the
factory setting, and it is highly
recommended that you use your Pro300 in
this mode.
BandsMOD
In this setting, Pro300 will warn you
with an audible alert, and associated text
message stating which band is turned off
(i.e. “SWS OFF”). This warning is displayed
during the start up sequence (standard or
fast).
WARNING: Only modify bands if you
are absolutely certain that there are no
traffic radar units using that specific
band in your area.
16
Details of Programming
Features and Specifications
Operating Bands
• X-band 10.525 GHz ± 25 MHz
• K-band 24.150 GHz ± 100 MHz
• Ka-band 34.700 GHz ± 1300 MHz
• Laser 904nm, 33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne, GaAs FET VCO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Diodes
Display
• 280 LED Alphanumeric
• Bar Graph, Threat Display,
or Tech Display
• 3 Levels of Brightness,
plus Dark Mode
Power Requirement
•
12VDC, Negative Ground
• SmartCord (included)
Programmable Features
• Power-On Indication
• Voice Alerts
• Power-On Sequence
• Signal Strength Meter
• AutoMute
• City Mode Sensitivity
• Radar / Laser Bands
Sensitivity Control
• Highway, AutoScan and City
Auto Calibration Circuitry
VG2 Immunity
Dimensions (Inches)
• 1.25 H x 2.75 W x 4.75 L
17
Technical Details