Owner`s manual

The BEL Pro300 is the most advanced radar,
laser and safety detector ever designed by
Beltronics.
The BEL Pro300 includes full X, K,
SuperWide Ka, and Safety Warning System
radar capability, front and rear laser
detection, digital signal processing (DSP)
for superior range and reduced false
alarms, our patented Mute and AutoMute,
audible and visual band alerts, and all the
performance you’d expect from Beltronics.
In addition, the BEL Pro300 introduces
a new level of revolutionary performance
and innovative features.
• Superior long-range radar and laser
detection, including new “POP”
mode alert
• Advanced Programming lets you
customize 7 features
• AutoScan mode drastically reduces
false alarms, plus Highway and City
settings
• Ultra-bright alphanumeric Display
with 280 LEDs
• Exclusive Threat Display tracks and
displays multiple radar signals,
including signal strength.
• Tech Display provides actual
numeric radar frequency for any
radar signal
• New Programmable Bands (on/off),
including International and North
American settings.
• Detects and decodes Safety Warning
System messages
• Includes coiled SmartCord
If you’ve used a radar detector before,
a review of the Quick Reference Guide on
pages 4 and 5, and the Programming
information on pages 12 and 13 will briefly
explain the new features.
If this is your first detector, please read
the manual in detail to get the most out of
your Pro300’s outstanding performance
and innovative features.
Please drive safely.
Congratulations Quick Reference
1
Factory Default Settings
To reset Pro300 to its original factory settings, press
and hold the “CIT
Y” and “BRT” buttons while turning
the powetr on. Pro300’s display will provide a
Reset message, accompanied by an audible alert,
acknowledging the reset.
An example
Here is how you would turn Pro300’s AutoMute feature
off.
1 Enter the Program Mode by holding
both the CITY and BRT buttons down for 2 seconds.
Pro300 will beep twice and display
Program.
2 Then hold the RVW button down. The Pro300 will
scroll through the categories, starting with Pilot
(Pilot), then Voice (Voice), then Power-on sequence
(PwrOn), then Signal strength meter (Meter), and
then AutoMute (
aMute).
3 Release the RVW button when Pro300 shows
the AutoMute item. Since the factory setting is for
AutoMute to be on, Pro300 will display
aMute ON.
If you accidentally don’t release the RVW button in
time, and the Pro300 goes to the next category, hold
the RVW button down again, and after Pro300 scrolls
through all categories, it will begin again at the top
of the list.
4 Press the CHG button to change from aMute ON to
aMute OFF.
5 To complete the Programming, simply wait 8
seconds without pressing any button, or press the PWR
button.
The Pro300 will display Complete, beep, and
return to normal operation.
There are 7 user-selectable options so you can
customize your Pro300 for your own preferences.
The buttons labeled CITY and BRT are also used
to enter the Program Mode, REVIEW your current
program settings, and to CHANGE any settings as
desired. The words PROGRAM, RVW and CHG are
located on the top of the detector, and are highlighted
in graphics.
How to use Programming
1 To enter Program Mode, press and hold both
CITY and BRT buttons down for 2 seconds.
The unit will beep twice, and will display the word
Program.
2 Then press the RVW button to review the
current settings. You can either tap the button to
change from item to item, or hold the button to scroll
through the items.
3 Press the CHG button to change any setting.
You can either tap the button to change from setting
to setting, or hold the button to scroll through all the
options.
4 To leave Program Mode, simply wait 8 seconds
without pressing any button, or press the PWR
button. The unit will display
Complete, beep, and
return to normal operation.
Programming Details 
FCC Note:
Modifications not expressly approved
by the manufacturer could void the
user’s FCC granted authority to operate
the equipment.
Receive a FREE Travel Case when you
register your Pro300 on our
website at Beltronics.co
m
Register
online: Beltronics.com