User`s guide

ProControl Guide98
The CHANNEL/GROUP display shows the name of the se-
lected group. The individual channel members of the group
are indicated (lit solid) on the CHANNEL MATRIX LEDs.
The names of the individual group members are now dis-
played vertically in the DSP EDIT/ASSIGN displays, which
will show (Pro Tools) channel number and abbreviated
channel name, separated by a space (for example, “A12
Guit”). If there are more than eight members in the group,
the BANK SELECT/NUDGE switch will flash. Use the BANK
SELECT left/right cursor arrows to scroll through the mem-
ber list in banks of eight.
3 To add additional channel strips to a group, press the cor-
responding channel switches in the CHANNEL MATRIX.
The switch LED now lights solid, indicating that the chan-
nel strip is now a member of the current group. If a channel
strip is outside of the current bank view, press the appropri-
ate BANK switch (A-D) to access it.
4 To remove a group member, press its CHANNEL MATRIX
switch. Its LED goes out, indicating that it is no longer a
member of the current group.
5 Press the Group EDIT switch again to complete the oper-
ation, or press ESCAPE to cancel. The CHANNEL MATRIX
switches return to the prior STATUS function.