User`s guide

ProControl Guide110

To cancel out of a recording and discard the current take:

■ Hold CTL (CLUTCH) and press STOP in the ProControl

Transport section. To use the CPU keyboard, hold Con-

trol/Ctrl and press the Space bar.

✽ In addition to Disk Allocation settings, you might want or need

to conﬁgure the Record Allocation setting in Pro Tools Prefer-

ences. Refer to the Pro Tools Reference Guide for details.

Record Modes

Record Safe Mode

Pro Tools provides a record safe mode to lock out recording

on any track in a session.

To enable record safe status on a channel strip:

■ Holding down the c (CTL) switch, press the channel

REC/RDY switch.

– or –

■ Use the CHANNEL MATRIX REC/RDY and channel

switch(es).

After placing a track in record-safe, its REC/RDY LED will

briefly flash. If you attempt to arm a record-safe channel for

recording, the REC/RDY switch LED will not light.

Keyboard Shortcuts for applying to All/All Selected

◆ OPT(ALT)ALL + c (CTL) + REC/RDY switch on any chan-

nel: clears/enables record safe status on all channels

◆ SHIFT/ADD + OPT(ALT)ALL + c (CTL) + REC/RDY switch

on any channel: clears/enables record safe status on all se-

lected channels

To take a track (or tracks) out of record safe mode:

■ Hold down the c (CTL) switch and press the REC/RDY

switch of any channel in record safe mode.