User`s guide

ProControl Guide158
Method 2: Assigning Sends from the
DSP EDIT/ASSIGN Section
With the DSP EDIT/ASSIGN section you can view, assign
and edit all five sends on any channel strip at one time.
To assign a mono or stereo send via the DSP EDIT/ASSIGN
section:
1 Press a channel INS/SEND switch. Channel name is dis-
played in the CHANNEL/GROUP display of the DSP
EDIT/ASSIGN section.
2 Make sure SENDS mode is enabled in DSP EDIT/ASSIGN,
if needed — channel sends are shown vertically (1-5).
3 Press the ASSIGN/ENABLE switch next to the send of in-
terest. It flashes, indicating that assign mode is enabled.
4 Rotate the data encoder to scroll through the available
send destination choices, which will be displayed in the dis-
play next to the encoder.
5 When the desired send choice is displayed, press the AS-
SIGN/ENABLE switch to confirm.
To toggle between channel Sends and Inserts/Params mode:
■ Press the SENDS switch in the DSP EDIT/ASSIGN section
to flip to that channel’s SEND view. This is most useful
when already editing and/or assigning Plug-Ins or other in-
serts for the channel, letting you quickly swap DSP
EDIT/ASSIGN focus between sends and Plug-Ins.
Displaying Send Assignments
To display send names:
■ Hold down any SEND switch (A-F, E-J). The encoder dis-
plays show current Send assignment for each banked chan-
nel.
The send name ProControl displays is determined by
Pro Tools I/O Labels settings and will match those listed in
Pro Tools Sends selector menu.
COUNTER MODE
SUSPEND
GROUPS
1
2
3
4
5
6
7
8
DSP EDIT / ASSIGN
CHANNEL / GROUP
MASTER
BYPASS
COMPARE
ASSIGNSELECT
IN/OUT/ØAUTO ENABLE
BYPASS
PRE / POST MUTE
INSERTS
PARAM
INFO
SENDS
SELECT
EDIT
ENABLE
CREATE
Bus 1-2 
No Send
No Send
No Send
No Send



Aux 1
Bus 1-2 Bus 1-2