User`s guide

Chapter 3: ProControl Basics 63
The Master Faders Switch
The MASTER FADERS switch allows mono or stereo Master
Faders created in Pro Tools to be immediately displayed on
the Fader Section of the ProControl Main unit. Using this
switch, all Master Faders in the current session are instantly
called up on the ProControl Main Unit. This feature is espe-
cially useful in large sessions where it might be time con-
suming to Bank/Channel swap to the Master Faders.
To access Master Faders from the MASTER FADERS Switch:
1 Press the MASTER FADERS switch. Its LED flashes. All
Master Faders that exist in the current Pro Tools session are
now displayed (right justified) in the Fader section of the
ProControl Main Unit. This is true even if you are using an
expanded ProControl system. In addition, all Pro Tools
Master Faders are displayed regardless of their current
Show/Hide status in Pro Tools.
2 Once these faders are up on the Fader Section, they may
be named, adjusted and automated in the same way chan-
nel faders are manipulated. If there are more than eight
Master Faders in the session, pressing the right or left BANK
SELECT button brings up the next set of Master Faders and
displays them on the ProControl Main Unit Fader Section.
3 To exit the MASTER FADERS mode, press the MASTER
FADERS switch again. This will return the ProControl Main
Unit Fader Section settings to their previous state/channel
display.
MASTER FADERS