DLT-15A Powered Professional Two-Way Sound Reinforcement Loudspeaker 11/11
DLT-15A Contents CUSTOMER SUPPORT..........................................................................................................................2 UNPACKING.............................................................................................................................2 HANDLING PRECAUTIONS...................................................................................................................3 FEATURES.............................................................
DLT-15A Handling Precautions ELECTRICAL PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
DLT-15A Safety Precautions DLT-15A loudspeaker can easily reproduce sound pressure levels (SPL) sufficient enough to cause sever and permanent hearing damage. A great degree of care should be taken to protect your ears to prolong exposure to SPL in excess of 85dB. • For adult use only - Keep out of the reach of children. • Be sure all power is turned off before making speaker connections • When using the speaker make sure the grille is always attached.
DLT-15A Main Features DLT-15A Registration DLT-15A Speaker System: • 500W Program Power • XLR & 1/4” Line Level Inputs • XLR Parrallel Output for Daisy Chaining • Rotatable HF Horn (90 x 40) • Active Crossover • 14 M10 Rigging Points • Plywood Cabinet • Built-In Pole Mount Socket • 3 Band Equalizer • Clip and Power LEDs • Built-in Heavy Duty Carrying Handles • Attached heavy Duty Rubber Feet The DLT-15A carry a one year (365 days) limited warranty.
DLT-15A Rear of DLT-15A Controls and Features 1 2 3 4 5 8 6 7 ©American Audio® - www.AmericanAudio.
DLT-15A Rear Panel: Rear Panel Controls and Features 1. BALANCED XLR/1/4” COMBO LINE INPUT – This connection is designed to accept a balanced line input signal from a mixer or other line level device with a balanced output jack. Use a balanced cable when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure to connect only line level input devices such as mixers and tape machines to this jack. 2.
DLT-15A Rear Panel Controls and Features FUSE HOLDER – This housing stores the 3.15 amp GMA protective fuse. Always replace with the exact same type fuse, unless otherwise instructed, by an authorized American Audio® service technician. Replacing with any other type of fuse than that of the recommended fuse will void your unit warranty. ©American Audio® - www.AmericanAudio.
DLT-15A Horn Rotation The DLT-15A is equipped with a rotatable high frequency horn. The horn can be turned 90 degrees when a differnet dispersion is desired; i.e. when rigging the speaker horizontally. Carefully follow the directions below to rotate the horn. 1. Start by removing the 6 phillips screws located on each side, that hold the grille in place. 2. Carefully remove the grille from the speaker. DO NOT remove it completely! Seperate it enought to disconnect the Clip LED wire. See Step 3. 3.
DLT-15A Typical DLT-15A Output Set-Up Typical Speaker Set-Up XLR-XLR Balanced Cables ©American Audio® - www.AmericanAudio.
DLT-15A Looping Speakers DLT-15A Looping From Mixer To Next DLT-15A (If Applicable) ©American Audio® - www.AmericanAudio.
DLT-15A Mounting Options Pole Mounting – The DLT-15A also include a pole mount option. The pole mount socket located on the bottom of the speaker may be used to secure the speaker to a speaker tri-pod, such as the American Audio® SPS-1B as illustrated on the left.
Available Accessories DLT-15A Speaker Rigging Hardware – The DLT-15A may be permanently installed or mounted using any of the available third party wall brackets and ceiling mounts available. Always be sure to follow all safety instructions and guidelines included with the mounting hardware for safe and proper installation. American Audio® carries an assortment of rigging hardware specially designed to work with the DLT-15A. Please contact your dealer for more information and availability.
DLT-15A 1-YEAR LIMITED WARRANTY Warranty A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
Technical Specifications DLT-15A Model: American Audio® DLT-15A - Professional Powered Sound Reinforcement Loud Speaker Speaker Section: Dimensions: Weight: Environmental conditions: Frequency Response: Crossover: Nominal Dispersion: Amplifier Section: 17.5” (L) x 17.5” (W) x 28.75” (H) / 445mm x 445mm x 730mm 60 Lbs.
©American Audio® World Headquarters: 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-3322 Fax: 323-725-6100 Web: www.AmericanAudio.us E-mail: info@americanaudio.us American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands service@americandj.eu / www.americandj.