User manual

©American Audio® - www.americanaudio.eu Encore2000™ User Manual Page 36
12.3 STARTING PLAYBACK
Load an audio CD as described in chapter 12.1
Loading/Ejecting Discs and/or USB Device on page 34.
Pressing the Play/Pause Button (13) with an audio CD
loaded will immediately start playback. The Play Indicator
(63) will glow as soon as playback begins. The point at
which playback starts (“cue point”) will automatically be
stored in the memory as the cue point. The unit will
return to this cue point (the point at which playback
started) when the Cue Button (15) is pressed.
12.4 PAUSING
This function pauses playback at the exact same point the Play/Pause Button (13) was
pressed. Pressing the Play/Pause Button (13) will switch between play and pause modes.
When the unit is in pause mode the Pause Indicator (63) will show in the LCD Display (20).
The blue Play/Pause Button LED will also begin to flash repeatedly.
12.5 AUTO CUE
This function will automatically set a cue point to the first
audio point when a CD is loaded.
The first set cue point will always be the beginning of
track 1.
If a new track is selected before the Play Button (13) is
pressed, a new cue point will be set to reflect the new
starting point.
12.6 STOPPING PLAYBACK
Stopping playback will not stop the drive mechanism, but merely pause or cue the track, this
functions allows the unit to begin play instantly. The drive mechanism will only stop if a disc
is ejected or the unit has gone in to sleep mode. There are two ways to stop (pause)
playback: