Media Operator BT™ use guide
©2017 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
CONTENTS General Information 4 Limited Warranty 6 Safety Instructions and Guidelines 7 Overview 9 Use / Wireless Audio Pairing 10 Technical Specifications 11 3 www.adj.
GENERAL INFORMATION INTRODUCTION The MEDIA OPERATOR BT is a fast, simple and reliable all-in-one MP3/Wireless Audio media player designed for permanent installations where easy control of music is a must (i.e. restaurants, fitness studios, retail locations, etc.) and great for mobile entertainers as well. The Media Operator BT offers digital playback from Memory Cards or USB sticks/drives.
WARRANTY REGISTRATION Please complete and mail in the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container.
LIMITED WARRANTY A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty periods below). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
SAFETY INSTRUCTIONS AND GUIDELINES This device is designed for indoor venues, on stage, in nightclubs, theatres, etc. Use of this device outdoors and/or wet environments voids all manufacturers warranties. For proper operation, follow the guidelines described in this manual. Only qualified and certified personnel should perform installation of this device. Any modifications to any part of this device will void the original manufactures warranty and increase the risk of damage and/or personal injury.
SAFETY INSTRUCTIONS AND GUIDELINES DO NOT position device close to any FLAMMABLE MATERIALS while operating. DO NOT attempt installation and/or operation without knowledge how to do so. DO NOT permit operation by persons who are not qualified to operate this type of device. DO NOT shake device, avoid brute force when installing and/or operating. DO NOT operate this device if the main power cord have become frayed, crimped and/or damaged.
OVERVIEW 1. Power Switch / LED Indicator - Power device ON/OFF, blue LED indicates power ON 2. Multimedia Player Input / Controls - Memory Card, USB, and Wireless Audio Devices 3. 3.5mm Mini-Stereo (unbalanced) Input Jack - Connect stereo audio source 4. INPUT - Signal input selection dial: LINE 1, 2, 3, 4, and AUX 5* inputs *AUX input includes wireless audio source 5. MUSIC VOL - Control music output volume of input sources 6. HIGH - Adjust music output high (treble) EQ sound 7.
USE 1. Connect LINE inputs and outputs on the rear of the unit. 2. Install unit in a standard 19” rack mountable location and secure with screws (not included). 3. Connect included AC power cable to an appropriate power source. (115V / 230V) 4. If using a microphone (not included), connect to the input on the front of the unit. 5. If using an external audio player/source (not included), connect to the mini-stereo input jack. NOTE: When an audio source is connected to the 3.
TECHNICAL SPECIFICATIONS SUPPORTED MULTIMEDIA INPUT FORMATS Memory Card USB Flash Drives Wireless Audio Devices CONNECTIONS (4) RCA Stereo Line Inputs (L / R) (1) 3.5mm Mini-Stereo Input (1) RCA Stereo Line Output (L / R) (1) ¼” Unbalanced Output (L / R) (1) XLR Balanced Output (L / R) (1) AC Power Input (1) Multi-Voltage Power Supply Switch (115V / 230V) SIZE / WEIGHT Length: 19.0” (483 mm) Width: 4.0” (103 mm) Horizontal Height: 1.7” (44 mm) Weight: 3.0 lbs. (1.