PXI 12P™ Powered Professional Two-Way Sound Reinforcement Loudspeaker AMERICAN AUDIO 4295 Charter Street Los Angeles, Ca. 90058 www.AmericanAudio.us Rev.
PXI 12P™ Contents CUSTOMER SUPPORT..........................................................................................................................2 UNPACKING.............................................................................................................................2 HANDLING PRECAUTIONS...................................................................................................................3 FEATURES.......................................................................
PXI 12P™ Handling Precautions ELECTRICAL PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
PXI 12P™ Safety Precautions PXI 12P™ loudspeaker can easily reproduce sound pressure levels (SPL) sufficient enough to cause sever and permanent hearing damage. A great degree of care should be taken to protect your ears to prolong exposure to SPL in excess of 85dB. • For adult use only - Keep out of the reach of children.
PXI 12P™ Main Features PXI 12P™ Speaker System: • Heavy Duty Polypropylene Cabinet • Built in XLR & 1/4” Mic and Line Level Inputs • XLR and RCA Balanced Inputs • Built-in Rigging Points • 1/4” and XLR Line Outputs • Built-in Pole Mount Socket • Bass and Treble Tone Controls • Clip and Power LEDs • 300 Watts • Built-in Heavy Duty Carrying Handle • Attached heavy Duty Rubber Feet PXI 12P™ Registration The PXI 12P™ carry a one year (365 days) limited warranty.
PXI 12P™ Controls and Features 5 1 6 2 7 3 4 6 8 3 1. HIGH FREQUENCY TRANSDUCER – This unit is used to reproduce the high frequency response. 2. 12” WOOFER – The high-powered 12” woofer is used to reproduce the midrange and low frequencies. 3. RUBBER FOOT – The speaker includes heavy-duty rubber feet on the bottom of the unit. These feet are used to secure a speaker to another when stacking.
PXI 12P™ Rear Panel Controls and Features Rear of PXI 12P™ 9 10 11 12 L INE IN 13 14 15 16 17 18 19 20 21 22 23 24 PXI 12P 25 Rear Panel: 9. MIC 1/LINE LEVEL XLR INPUT JACK - This jack is used for Microphone 1 and line level inputs. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to the LINE inputs.
PXI 12P™ Rear Panel Controls and Features Rear Panel Cont.: 15. BALANCED XLR LINE INPUT – This connection is designed to accept a balanced line input signal from a mixer or other line level device with a balanced output jack. Use a balanced cable when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure to connect only line level input devices such as mixers and tape machines to this jack. 16.
PXI 12P™ Typical Speaker Set-Up Typical PXI 12P™ Output Set-Up AUX 4 AUX / IN MODEL NO.: Q-3433 MKII POWER SOURCE: 115/230V~ 50/60Hz 20W MADE IN CHINA MIN MAX TRIM OUTPUT XLR-XLR Balanced Cables PXI 12P™ PXI 12P™ ©American Audio® - www.AmericanAudio.
PXI 12P™ Looping Speakers PXI 12P™ Looping From Mixer To Next PXI 10P™ (If Applicable) ©American Audio® - www.AmericanAudio.
Rigging and Mounting Options PXI 12P™ Speaker Rigging Hardware – The PXI 12P™ may be permanently installed or mounted using any of the many available third party wall brackets and ceiling mounts available. Always be sure to follow all safety instructions and guidelines included with the mounting hardware for safe and proper installation. American Audio® carries an assortment of rigging hardware specially designed to work with the PXI 12P.
PXI 12P™ Rigging and Mounting Options Floor Monitor Brackets - These brackets are helpful for DJ’s and bands to help moniter their sound during a performance. This is also an alternative to standing the speaker straight up or mounting it on a stand. These brackets slide into each end of the speaker. Each speaker has its own special sized floor bracket. ©American Audio® - www.AmericanAudio.
PXI 12P™ Available Accessories APX-B - Speaker Carry Case - A rugged gig bag with rollers, an adjustable pull out handle, and a heavy duty zipper. Designed to protect your speaker from damage and the environment during transportation and storage. Z-APX/B 7 Z-APX/H - Speaker Rigging Hardware American Audio® carries an assortment of rigging hardware specially designed to work with the PXI 12P.™ The Z-APX/B is a heavy-duty bolt and may be used to secure the speaker to a cable or chain.
PXI 12P™ 1-YEAR LIMITED WARRANTY Warranty A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
PXI 12P™ Model: Speaker Section: Technical Specifications American Audio® PXI 12P™ - Professional Powered Sound Reinforcement Loud Speaker Dimensions: Weight: Environmental conditions: Frequency Response: Crossover: Nominal Dispersion: 12” (L) x 15.5” (W) x 22” (H) / 305mm x 393mm x 559mm 53.5 Lbs.
©American Audio A Division of the American DJ Group of Companies American Audio World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.AmericanAudio.us E-mail: info@AmericanAudio.
