PSW 15™ Professional Subwoofer PSW 15P™ Powered Professional Subwoofer AMERICAN AUDIO 4295 Charter Street Los Angeles, Ca. 90058 www.AmericanAudio.
PSW 15™/PSW 15P™ Contents CUSTOMER SUPPORT..........................................................................................................................2 UNPACKING.............................................................................................................................2 HANDLING PRECAUTIONS...................................................................................................................3 FEATURES...............................................................
PSW 15™/PSW 15P™ Handling Precautions ELECTRICAL PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
PSW 15™/PSW 15P™ • • • • • • • • • • • • • • • • • • Safety Precautions The PSW 15™ and the PSW 15P™ subwoofers can easily reproduce sound pressure levels (SPL) sufficient enough to cause sever and permanent hearing damage. A great degree of care should be taken to protect your ears to prolong exposure to SPL in excess of 85dB. For adult use only - Keep out of the reach of children.
PSW 15™/PSW 15P™ • • • • PSW 15™ Subwoofer: Dual Speakon Type Connections 500 Watts RMS - 900 Watts Peak Power Built-in Heavy Duty Carrying Handle Attached heavy Duty Rubber Feet PSW 15™/PSW 15P™™ Main Features PSW 15P™ Powered Subwoofer: • Dual XLR/1/4 Inputs • XLR Balanced Inputs • XLR Line Outputs • 300 Watts RMS - 1000 Watts Peak Power • Built-in Heavy Duty Carrying Handle • Attached heavy Duty Rubber Feet • Built-In Adjustable Electronic Crossover Registration The PSW 15™ and the PSW 15P™ carry a
PSW 15™/PSW 15P™ Controls and Features Rear of PSW 15™ PSW 15 INPUT 1 OUTPUT Serial No. 1. SPEAKON CONNECTIONS – The PSW 15 includes a pair of Speakon type connections. You may use both connections at once to loop subwoofers. The Speakon connectors have a pin 1+ (hot) and 1- (ground) configuration, pins 2+ and 2- are not used. For more wiring information regarding the Speakon connectors see page 17. ©American Audio® - www.AmericanAudio.
PSW 15™/PSW 15P™ Rear Panel Controls and Features Rear of PSW 15P™ 2 3 4 5 6 7 8 9 10 11 Rear Panel: 2. INPUT LEVEL – This knob is used to regulate the output signal of the line level source connected to the Line Level Input Jacks (4 & 6). 3. FREQUENCY RESPONSE – This knob is used to adjust the crossover frequency of the subwoofer. 4. BALANCED XLR/1/4” LINE INPUT – This connection is designed to accept a balanced line input signal from a mixer or other line level device with a balanced output jack.
PSW 15™/PSW 15P™ Rear Panel Controls and Features 7. XLR OUTPUT JACK – This jack is used to send the incoming signal from either of the Inputs Jacks to another PSW 15P™ or speaker. 8. VOLTAGE SELECTOR SWITCH - Because power supplies vary from location to location a voltage selector switch has been incorporated in the unit's design. This switch can select a voltage input of 120v or 230v to accommodate the two major power source. Always be sure to disconnect the power plug before changing the voltage. 9.
PSW 15™/PSW 15P™ Subwoofer Set-Up PSW 15P™ Input/Output Set-Up AUX 4 AUX / IN MODEL NO.: Q-3433 MKII POWER SOURCE: 115/230V~ 50/60Hz 20W MADE IN CHINA MIN MAX TRIM OUTPUT XLR-XLR Balanced Cables PSW 15P™ ©American Audio® - www.AmericanAudio.
PSW 15™/PSW 15P™ Subwoofer Set-Up PSW 15™ Input/Output Set-Up AUX 4 AUX / IN MODEL NO.: Q-3433 MKII POWER SOURCE: 115/230V~ 50/60Hz 20W MADE IN CHINA MIN MAX TRIM OUTPUT XLR-XLR Balanced cables V4000 Amplifier Speakon Cables DLS 15 PSW 15 INPUT OUTPUT INPUT OUTPUT Serial No. ©American Audio® - www.AmericanAudio.
PSW 15™/PSW 15P™ Speakon Assembly SPEAKON ASSEMBLY: You will need a pair of Neutrik Speakon® NL4FC connectors. You will also need high-quality two or four conductor subwoofer cable, a pair of needle-nosed pliers and a 1.5mm Allen key to assemble the Speakon connectors to your subwoofer wire. To assemble the Neutrik Speakon NL4FC connector, complete the following steps: Figure 10 1. Strip back 3 /4-inch of the cable casing.
PSW 15™/PSW 15P™ 1-YEAR LIMITED WARRANTY Warranty A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
PSW 15™ Model: Subwoofer Section: Technical Specifications American Audio®PSW 15™ - Subwoofer Dimensions: Weight: Environmental conditions: 13.58” x 16.53” x 26.37” / 4344mm x 419mm x 669mm 56 Lbs. / 25.
Technical Specifications PSW 15™/PSW 15P™ Model: American Audio® PSW 15P™ - Professional Powered Subwoofer Subwoofer Section: Dimensions: Weight: Environmental conditions: Frequency Response: Crossover: Power Capacity: 13.58” x 16.53” x 26.37” / 344mm x 419mm x 669mm 61 Lbs.
©American Audio A Division of the American DJ Group of Companies 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.AmericanAudio.us E-mail: info@AmericanAudio.