Specifications

REAR PANEL - CONTROLS AND FUNCTIONS
American DJ
SERIAL NO.
MODEL NO. : Q-3433
POWER SOURCE :
115/230V~ 50/60Hz 20W
MIC 3 MIC 2
LIGHT
CONTROL
L R
BALANCE OUTPUT
PLAYER CONTROL
OUTPUT
MASTER ZONE REC
L
R
LINE 4
CH 4
LINE 3
CH 3
PHONE 3
AUX 3
GND
AUX 3
LINE 2
CH 2
PHONE 2
AUX 2
GND
AUX 2
LINE 1
CH 1
PHONE 1
AUX 1
GND
AUX 1 PHONO 1PHONO 2PHONO 3
AC~
230V 115V
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE - NE
PAS OUVRIR
43
38
45
39
50
4940
33 3432
46 4744
37
41 42
48 51
35 36
©American DJ Supply® - www.americandj.com - Q-3433/SX User Instructions page 8
PLAYER CONTROL - These jacks are used to input 1/8" mono mini plugs from a compatible
American DJ "Q" series CD players also featuring Fader “Q” Start. This feature is used to remote
control a CD player. By moving the mixer crossfader (30) from left to right you can start and pause
a "Q" series compact disc player. In other words, when the mixer crossfader is to the left, and you
move it at least 20% to the right, any player connected to the "B" PLAYER CONTROL will begin
to play. When the crossfader is to the right, and you move it at least 20% to the left position, any
player connected to the "A" PLAYER CONTROL will begin to play. You can create great effects
similar to scratching with this feature.
ZONE LEVEL OUTPUTS - The RCA jacks send a low current, unbalanced output signal. These
jacks should only be used for shorter cable runs to signal processors or looping to another mixer.
CHANNEL 4 - LINE 4 RCA INPUT JACKS - Use these line level jacks to connect CD players
or Tape Decks. Line level musical instruments with stereo outputs such as Rhythm Machines or
Samplers should also be connected to LINE level inputs. Turntables should only be connected
to "Phono" inputs. The red colored RCA jack represents the right channel input and the white
represents the left channel input.
CHANNEL 3 - PHONO 3/AUX3 INPUT JACKS - The type of input must directly reflect the
selected mode of the CHANNEL 3 - LINE LEVEL SELECTOR SWITCH (36). Connect turntables
equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges).
CD players or Tape Decks and other line level instruments may be connected to these jacks as
long as the CHANNEL 3 - LINE LEVEL SELECTOR SWITCH (36) is in the "AUX 3" position.
The red colored RCA jack represents the right channel input and the white represents the
left channel input.
CHANNEL 3 - LINE LEVEL SELECTOR SWITCH - This switch is used to change the mode
of CHANNEL 3 - PHONO 3/AUX3 INPUT JACKS. When connecting turntable to these jacks
be sure the switch is in the PHONO position, and when using line level input devices select
AUX. Always be sure main power is shut off before change the position of the Line
Level Selector Switch.
32.
33.
34.
35.
36.