User guide

FOLDER
TRA CK
M
REMAIN
S
F
PITCH
AUTO BPM
CD MP3
CUE
REL OOP
SINGLE
AUTO CUE
©American Audio® - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 15
GENERAL FUNCTIONS AND CONTROLS (Cont.)
D. VFD DISPLAY PANEL (FIGURE 4)
52. REVERSE INDICATOR - The "REVERSE" indica-
tor will glow when the unit is in reverse play mode.
53. PLAY INDICATOR - The "PLAY" indicator will
glow when the unit is in play mode.
54. PAUSE INDICATOR - This indicator will glow
when the drive is in pause mode.
55. CUE INDICATOR - This indicator will glow when
the unit is in CUE or mode and will flash every time a
new CUE POINT is set.
56. CHARACTER DISPLAY - This will display the
name of the track and album when a Mp
3 disc is
loaded.
57. AUTO BPM - This will indicate that the AUTO
AUTO BPM counter is active. To turn on the AUTO
BPM press and hold the TAP BUTTON (29) for 2
secs.
58. BPM METER - This meter will display the BPM's
of the current track.
59. BPM INDICATOR - This will indicate that you are
in manual BPM mode. You can count the beats by
tapping the TAP button.
60. TEMPO LOCK - This will indicate the Tempo
Lock function is active.
61. PITCH METER - This meter will display the pitch
percentage applied by the
PITCH SLIDER.
62. ADVANCED TRACK BUFFER TIME -
This indi-
cator will show the time left before the
advanced
selected track will begin to play.
63. TIME BAR/SCRATCH INDICATOR - This bar
gives a visual approximation of a track's or disc's
remaining time. This bar will begin to flash when a CD
is ending or a track if the unit is in "SINGLE" mode.
64. REMAIN INDICATOR - When "REMAIN" is indi-
cated in the VFD DISPLAY (17) the TIME DESCRIBED
(64) in the VFD will define the current track's remain-
ing time.
65. TIME DISPLAY - These indicators detail the
Minutes, Seconds, and Frames. The meter will display
either the elapse, total, or remaining time of a track
or disc.
66. TRACK INDICATOR - This 2-digit indicator visu-
ally details the current track cued or playing.
67. FOLDER DISPLAY - This indicator describes
which folder is currently cued or is playing.
68. RELOOP INDICATOR - Appears when LOOP is
engaged or ready to be engaged.
69. SINGLE INDICATOR - This indicates that the CD
drive is in single play mode, the track will play once
and return to CUE mode. If the single indicator is not
on the unit is in continuous mode In continuous mode
the drive will play all the remaining tracks on the disc.
Once the remaining tracks have ended the unit will
return to cue mode
70. AUTO CUE - This will indicate if the Auto Cue is
on or off. Press and hold the SGL/CTN (5) for 1 sec.
to turn the Auto Cue function on and off.
71. MP3 INDICATOR - This will indicate that a Mp3
disc is loaded in the drive.
72. CD INDICATOR - This will indicate a CD disc is
loaded into the player.
Figure 4
54
65 6463 62 61
605958575655
70
71
72
69
5352
67 66
FOLDER
TRACK
M
TOTA LREMAIN
S
F
PITCH
AUTO BPM
CD MP3
CUE
RELOOP
SINGLE
AUTO CUE
68