User guide

BASIC OPERATIONS

Figure 6: Hold down the Eject

Button to remove a disc.

Figure 5: When inserting a disc always hold the

disc by it edges and load the disc label side up.

Figure 7: Tapping the reverse track button will

jump back to the previous track.

Figure 8: Tapping the forward track button

will skip forward to the next track.

1. LOADING/EJECTING DISCS

The Velocity Mp3™ can only play regular 5 inch CDs. 3 inch, odd shaped, and oval CDs are not compatible.

When loading a CD into the transport drive, always hold the disc by it edge (see Figure 5). Load the disc label

side up and slide it in the disc slot. Never touch the signal surface (the glossy side). To remove a disc from the

slot press the EJECT BUTTON (11), see Figure 6.

CAUTION:

•

NEVER attempt to insert any other objects beside 5" CD in the disc slot.

• NEVER attempt to insert more than one disc at a time. Doing so may result in sever damage to your unit.

• DO NOT force a disc into the slot when the power is off, this may damage the drive system.

2. SELECTING TRACKS

Select a desired track by using either of the two TRACK BUTTONS (3 & 4). Tapping the TRACK BUTTONS

(3 & 4) once will select either the next higher or lower track. You may hold down the

TRACK BUTTONS (3 &

4) to change tracks continuously at a faster speed. If you are using the TRACK BUTTONS (3 & 4) to select a

new track during playback (a track is already in play mode) the new track you selected will immediately begin

playback as soon as the search operation is completed.