User guide

5. STOPPING PLAYBACK - Figures 9 & 10

Stopping playback will not stop the drive mechanism, but merely

pause or cue the track, this functions allows the unit to begin play

instantly. The drive mechanism will only stop if a disc is ejected or

the unit has gone in to sleep mode. There are two ways to stop

(pause) playback:

1) Press the PLAY/PAUSE BUTTON (23) during playback. This

will pause playback at the exact same point the

PLAY/PAUSE

BUTTON (23) was pressed.

2) Press the

CUE BUTTON (22) during playback. This will pause

playback and return the track to the last set cue point.

3. STARTING PLAYBACK - Figure 9

Insert an audio CD as describe on page 14 (LOADING/EJECTING

DISCS). Pressing the PLAY/PAUSE BUTTON (23) with an audio

CD inserted will immediately start playback. The PLAY (53)

indica-

tor will glow as soon as playback begins. The point at which play

back starts (cue point) will automatically be stored in the memory

as the cue point. The unit will return to this cue point (the point at

which playback started) when the

CUE BUTTON (22) or the BOP

BUTTON (

34) is pressed and released.

BASIC OPERATIONS (CONT.)

Figure 9

Figure 10

4. AUTO CUE

This function will automatically set a cue point to the first audio source when a CD is inserted. The first set

cue point will always be the beginning of track 1. If a new track is selected before the PLAY BUTTON (23)

pressed, a new CUE POINT will be set to reflect the new starting point.

6. PAUSING - Figure 9

This function pauses playback at the exact same point the PLAY/PAUSE BUTTON (23) was pressed. Pressing

the PLAY/PAUSE BUTTON (23) will switch between play and pause modes. When the unit is in pause mode

the PAUSE INDICATOR (54) in the VFD DISPLAY (17) will glow. The green PLAY/PAUSE BUTTON (23) LED will

also begin to flash repeatedly.