User guide

ManualsBrandsAmerican Audio Manualsaudio & home theatreVELOCITY MP3

BASIC OPERATIONS (CONT.)

©American Audio® - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 18

7. FRAME SEARCH

This feature allows you to scroll through a track frame by frame,

allowing you to find and set a starting cue, sample, or loop point.

To use the scroll function you must first be in Pause Mode (see

section 5) or Cue Mode (see section 7). Once you are in Pause

or Cue mode, turn the

JOG WHEEL (24) to scroll through the

track (Figure 13). Turning the wheel in a clockwise direction will

advance the frame search and turning the wheel in a counter-

clockwise direction rewinds the frame search. When you use the

JOG WHEEL (24)

the monitor (headphone level) function allows

you to here what you are scrolling through. Once you reach your

desired starting point you can set a cue (starting) point by press

ing the

PLAY/PAUSE BUTTON (23) as in Figure 9. Pressing the

CUE BUTTON (22) as in Figure 10 will now return you to the point

you just set.

Figure 11

9. SETTING and STORING a CUE POINT:

Setting A Cue Point:

A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (23) is pressed. You may

set your cue points anywhere on a disc or in a track. You may set up to four independent cue points per disk.

Three cue points are stored in the

FLASH BUTTONS 1-3 (31) and one is shared by the IN BUTTON (33), BOP

BUTTON (34) and the CUE BUTTON (22). There are two (2) ways to set and create a CUE point as detailed in

figures 13 and

8. SCANNING (FAST FORWARD / FAST REVERSE)

This function gives you a fast search through a disk or

track. Turn the SEARCH KNOB (16) in clockwise direction

for fast forward or turn the wheel counterclockwise for fast

reverse. You can scan in four different forward and four dif

ferent reverse speeds depending on how much you rotate

the wheel.

1) You may press the IN BUTTON (33) on the fly (while the disc

is playing). This will set a CUE Point without music interruption.

Pressing the

CUE BUTTON (22) will now return you to the

same point that you pressed the

CUE BUTTON (22). You may

now store this CUE Point in any of the

FLASH BUTTONS

1-3 (31).

Pressing the CUE BUTTON (22), BOP BUTTON (34) or

the IN BUTTON (33) will now return you to this exact point.

Figure 13

Figure 12