User guide

BASIC OPERATIONS (CONT.)
Press the IN BUTTON (33). This will set the starting point of the
SEAMLESS LOOP. The IN BUTTON (33) LED will light.
Press PLAY/PAUSE BUTTON (23) to activate playback
mode.
Figure 18
Figure 17
©American Audio® - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 20
10. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to
create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length
of disc. You create a seamless loop between two continuous points of a d
isc.
2)
Press the OUT BUTTON (2)
to set the ending point for
your SEAMLESS LOOP (Figure 13). The
IN BUTTON (33)
and OUT BUTTON (2) LEDs will immediately begin to flash
rapidly, indicating the SEAMLESS LOOP mode has been
activated.
Figure 19
3)
VFD LOOP INDICATORS - During a seamless loop,
RELOOP INDICATOR
(68) will turn on in the VFD DISPLAY (17)
indicating a loop is active.
1)