User guide

©American Audio® - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 33
BUILT-IN EFFECTS
Figure 55
Figure 57
HOLD BUTTON: Use the HOLD BUTTON (19) to lock your
customized parameters. If the hold button is not activated any
changes to your parameters will be momentary. To activate the
hold function press the HOLD BUTTON (19) as in figure 58. When
the hold function becomes activated, the hold button will begin
to glow blue.
PARAMETERS:
All the effects have adjustable parameters. The parameters change
the way the effect will react. To enter the parameters menus for
any of the effects, press or turn either of the two PARAMETER
KNOBS (13 OR 14)
as in figure 56. When the parameter mode
is selected the time display in the VFD (17) will change to indi
-
cate the parameter your are adjusting. All effects except the pan
effect have two adjustable parameters. PARAMETER TIME (13)
and PARAMETER RATIO (14). Use these knobs to customize the
effects to your liking.
Figure 56
TRANS/PAN EFFECT: The TRANS effect simulates a real-time
mixer transformer effect. When the "Transformer" effect is acti
-
vated the
TRANS/PAN BUTTON (20) will glow green, when the
"Pan" effect is selected the button will glow red. The PAN effect
allows you to pan the output from the left channel to the right
channel.
TRANS EFFECT: The TRANS Effect has two adjustable param-
eters, Parameter Time and Parameter Ratio. The PT will adjust
the Trans Speed and The PR will adjust the Trans Audio Length.
The lower the PT value the faster the TRANS effect (PT 0500 =
1/2 second, PT 1000 = 1 second).
PAN EFFECT: The PAN effect uses the PT value to pan left to
Right. PT 0500 is the default setting which is center pan. The Pan
Value ranges from 10ms to ten seconds.