User guide

©American Audio® - www.americanaudio.us - VMS2™ Instruction Manual Page 17
MIDI LATENCY MODES
There are two MIDI Latency modes; Normal mode and Turbo mode. Normal mode has MIDI Latency
of 10 milliseconds, this is the default mode. Turbo mode has a MIDI latency of 1 millisecond.
To set the VMS2 to "Turbo mode:
Before powering on press and hold the CUE, PLAY, and PAUSE buttons on the  side.
Hold the buttons until     light up with the code version.
See page 11 CHANNEL VOLUME LEVEL INDICATORS for information on the code version.
It is recommended that you use the default mode if your computer does not meet the recommend -
ed system requirements or are using Windows Vista. It is also strongly recommended that you close
all programs running in the background, this will free up RAM and minimize CPU process. If you are
using a laptop, turn off your wireless card if possible since this may cause sound problems. Allow
your computers hard drive to have at least 20% free space.
EQ MODES
The EQ for the USB audio can work in two different modes, Pre & Post EQ. These EQ modes work
in the 4 out interface mode that is described on page 16.
In Pre EQ the USB audio signal is affected by the VMS2 EQ. Pre EQ is the default EQ. In Pre EQ
mode the ASIO Driver will list the VMS2 device number, the first number in the sequence will be a
"0". Please see the window below.
  
  