User guide
• 3 Cue Points Per Side • 2-Channel Mixer w/ Volume Faders
• MIDI Control via USB • Stereo Master and Booth Outputs
• Built-In 4 In 4 Out • Mic
• Seamless Loop (uninterrupted loop playback) • Master Volume Control
• Full EQ on 2 MIDILOG Channels • Track & Deck Selectors
• Crossfader Assign, Curve, & Reverse • Durable Touch Sensitive High-Res Jog Wheel
• Pitch Lock • One Mic Combo Jack
• Pitch Bend • Innofader Compatiable
• 82 MIDI Controls
• USB/Analog Source Selects on Each MIDILOG Channel
MAIN FEATURES
©American Audio® - www.americanaudio.us - VMS2™ Instruction Manual Page 7
Be sure your VMS2™ was shipped with the following:
1) VMS2™ Controller 2) Operating Instructions (This Booklet)
3) USB Cable 4) 6V Power Adapter
5) Virtual DJ Software 6) Warranty card
1) Place your unit on a flat surface or mount it in a secure rack mount case.
2) Be sure the player is mounted in a well ventilated area where it will not be exposed to direct
sunlight, high temperatures, or high humidity.
3) Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesir-
able interference.
1) Be sure main power is connected last to prevent any electrical damage.
2) Use RCA or XLR cables to connect the VMS2™ outputs to pow-
ered speakers or an amplifier. Never connect this player's output to a mixers "phono" inputs.
SET-UP
MINIMUM SYSTEM REQUIREMENTS*
PC Requirements:
• Windows XP Sp2 or Windows Vista (32-bit & 64-bit supported)
• PIV 1.2GHz Computer (SSE2 CPU), AMD 64 or Greater
• 1024_768 SVGA Video
• 2 GIG RAM (Vista)
• 40MB Free on the Hard-Drive (Recommended 2000MB)
• DirectX 9.0
Mac Requirements:
• Mac OS X 10.5 PPC/Intel, 10.5.6 Intel, or 10.6 Intel
• 1.86GHz
• 2GB RAM
* System Requirements may differ due to manufacturer software