Owner's manual

American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: [phone] or [phone]
Fax: [phone]
www.ameribike.com
Email: [e-mail]
Bike Haven
Product
Bike Haven
Capacity
See diagrams below and to left
Materials
Uprights: 4” x 3/16” square tube.
Feet: 3/8” plate
Roof Member: 4” x 3/16” square tube
Roof Member Long: 2” x 4” x 1/8” tube
Roof Panels: Type S deck 26g galvanized steel
Panels: ¼” clear polycarbonate with 1.77” square aluminum
framing
Finishes
An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Installation
Methods
Surface Mount has 10” square feet which must be
anchored to the ground with supplied anchors.
Space Use
& Setbacks
Consult local building codes for acceptable setbacks and
placement.
Load Data
Dead load = self weight of structure
Live load = 40 psf
Wind load = 90 mph exposure B
Seismic load = moderate
Footing: see page 4
Anchors: ½” diameter x 4.25” Simpson Strong-bolt 2
*These can also be modular.