Instructions / Assembly

2-IN-1 PORTABLE AIR COMPRESSOR

WITH SCREWDRIVER & BITS

(A) Air Compressor

(B) 3 yards 12V power cord

(D) 10pcs Screwdriver Bits with Holder

(E) 3pcs Inflating adaptors

(F) Air pressure valve

SET INCLUDES:

1. Remove the plastic valve cover from the tire you want to inflate.

2. Place the valve from the compressor (F) onto the air valve of the tire and screw it properly.

4. Turn the car ignition on.

Insert the 12V adapter (B) into the cigarette lighter of the car.

6. Make sure the compressor is sitting on a flat surface.

7. Turn on the switch of the compressor and it will start pumping air into the tire.

8. Always monitor the compressor and the tire as air is being pumped.

9. Check the air pressure gauge on the compressor to monitor desired pressure level.

10. Turn off the compressor once the gauge reaches the recommended tire pressure.

11. Unscrew the air compressor's valve from the tire and put the tire's valve cover back in place.

FOR TIRE INFLATION

The air compressor can be used for inflating a soccer ball, basket balls and other objects with the included adapters.

USING THE VALVE ADAPTERS FOR OTHER INFLATABLE OBJECTS

- This is not a toy. Please keep away from children.

- Do not over-inflate.

- Use the proper adapter.

- Always refer to the tire's or the item to be inflated or user manual for recommended air pressure.

- If the compressor has been running for more than 10 minutes. Please turn off and let it cool to avoid overheating.

WARNING

HW2320