Owner's manual

AMERICAN CAR CRAFT INSTRUCTIONS

CAMARO EXTERIOR DOOR HANDLE PLATES

PART#102083 patent pending

PARTS INCLUDED:

2-Stainless Badge Set

1-Adhesive Promoter Tube

Your badges are designed to be used on the exterior surface of your car and can be

placed to any flat surface that you choose.

1. Clean the area to be mounted with household rubbing alcohol to remove any

wax and dirt then swipe the area once with the adhesive promoter tube

provided.

2. Place each badge into position to familiarize yourself with each placement

before removing the liner. It MAY BE necessary to HAND FORM the badges to

CONFORM to the shape of the car doing this will prevent any possibility of the

badge popping loose or lifting long term.

PAGE 1
AMERICAN CAR CRAFT INSTRUCTIONS CAMARO EXTERIOR DOOR HANDLE PLATES PART#102083 patent pending PARTS INCLUDED: 2-Stainless Badge Set 1-Adhesive Promoter Tube Your badges are designed to be used on the exterior surface of your car and can be placed to any flat surface that you choose. 1. Clean the area to be mounted with household rubbing alcohol to remove any wax and dirt then swipe the area once with the adhesive promoter tube provided. 2.
PAGE 2
3. Once they are fitted properly peel the release liner from the back of each badge and carefully set them nice and evenly to your car. Press firmly to set. DO NOT GET WET FOR 24 HOURS. IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT AMERICAN CAR CRAFT AT 727-861-1500. Thank You and Enjoy Your New Purchase. AMERICAN CAR CRAFT 18924 SAKERA RD HUDSON FL 34667 Phone: 727 861-1500 Fax: 727 861-1520 www.americancarcraft.