Owner's manual

AMERICAN CAR CRAFT INSTRUCTIONS

POLISHED CAMARO 6PC REAR QUARTER TRIM

PART #102020 patent pending

PARTS INCLUDED:

6-Stainless Inserts

2-Adhesive Promoter Tubes

Your vents come to you with a protective liner. Do not remove liner until installation is

complete.

1. Each of the six stainless inserts can only fit to their unique spot on the quarter

panel. The first step will be to prepare the surface for installation by thoroughly

scrubbing the six areas first with rubbing alcohol to remove all wax and dirt. Once

this is done swipe the six areas once with the adhesive promoter snap tubes

provided.

PAGE 1
AMERICAN CAR CRAFT INSTRUCTIONS POLISHED CAMARO 6PC REAR QUARTER TRIM PART #102020 patent pending PARTS INCLUDED: 6-Stainless Inserts 2-Adhesive Promoter Tubes Your vents come to you with a protective liner. Do not remove liner until installation is complete. 1. Each of the six stainless inserts can only fit to their unique spot on the quarter panel. The first step will be to prepare the surface for installation by thoroughly scrubbing the six areas first with rubbing alcohol to remove all wax and dirt.
PAGE 2
. Each of the inserts comes to you flat. IMPORTANT: In order to prevent any possibility of the inserts popping away from the paint you MUST gently form the contour of the body to the insert. Place each insert in place to confirm its shape. 3. It WILL BE necessary to HAND FORM the inserts to CONFORM to the shape of the car doing this will prevent any possibility of the inserts popping loose or lifting long term. 4.