Owner manual

AMERICAN CAR CRAFT INSTRUCTIONS
Camaro RS Style Rear View Mirror Trim
PART#101042 OVAL NO Sensor
PARTS INCLUDED:
1-Stainless Mirror Trim Rings
This all new stainless trim ring accessories is an American Car Craft original idea that will
add that cool little something to your car mirrors that would otherwise just be a plain
OEM mirror.
1. Thoroughly clean the mirrors glass and perimeter with alcohol to remove any dust
/dirt and wax.
2. Before you permanently attach the trim ring, set it onto the mirror to get and idea of
just how it will set in place and also to get a look at the overall shape. Although it should
not be necessary you may need to adjust the perimeter shape so that it matches the
mirrors edge perfectly. The stainless is very thin and will allow you to do any adjustment
by hand very easily. TECH TIP: Should any adjustments be necessary it would be best to
set the trim ring on a totally flat surface such as a Formica counter top or piece of glass.
This will help to prevent the trim ring from warping out of shape and will keep the ring
to remain totally flat.

Summary of content (2 pages)