Instructions / Assembly

Installation Instructions Installation Instructions
Questions: Call 800-234-4228 Questions: Call 800-234-4228
2-Panel Patio Door
with Non-Assembled Frame
2-Panel Patio Door
with Non-Assembled Frame
16 17
Transparency to
create outlines
Transparency to
create outlines
Step 26
Step 27
Step 28
Install xed panel clips.
Install sill draft plug.
Install stopper bracket
and head draft plug.
Install the xed panel clips at
the bottom and top of the xed
(non-handled) panel on interior.
Close moving panel and lock
handle. Slide xed panel as far
as possible into the frame away
from the moving panel.
Select the correct sill draft plug
from the 2 supplied so that the
pile weatherstripping will face
the moving panel.
Select the correct head draft
plug from the 2 supplied so
that the pile weatherstripping
will face the moving panel.
Pre-drill(2)3/32"sillscrewholes
and apply sealant into holes prior
to setting screws.
Using2,#8x5/8"screws
(included) attach stopper
bracket to head of interior
track. Make sure the stopper
bracket is rmly seated against
the stationary panel.
Starting with the jamb, drive 2, #8
x3/4"pan-headscrews(included)
through the clip into both the jamb
and door panel on top & bottom.
Using2,#8x5/8"screws
(included) attach plug to xed
panel.Using2,#8x1/2"
screws (included) attach
plug to sill.
Using2,#8x5/8"screws
(included) attach head draft
plug to stopper bracket and
xed panel.
Apply sealant over the
sill screws.
2
2
1
1
1
1
2
2
3
3
Sill Draft Plug
Stopper Bracket
Exterior
Interior
Exterior
Step 25
Install xed panel
from the exterior.
Place top of xed panel
into exterior track, then put
bottom into position on
track.
NOTE: Be sure that the
pile weatherstripping
interlock faces the interior.
Exterior
4
Exterior
Head Draft Plug