Instructions / Assembly
American Craftsman Installation Guide
26
Replacement Windows
888-504-0005 www.AmericanCraftsmanWindows.com
Step 27
Single-Hung
Drill installation
holes.
Open bottom sash. Drill
one 3/32" installation
hole in each side
approximately 2" up from
the bottom to penetrate
structural supports at
least 1".
Power
driver
2"
2"
Interior
#8 x 2"
Flat head
screws
Step 28
Single-Hung
Fasten window.
Install #8 x 2" at head
screws (not supplied) into the
2 screw holes in each jamb.
Do not over tighten as this
may distort the window. Do
not damage balance cords.
Make sure screw heads are
ush with surface of window
to prevent interference with
sash operation.
Use caution to avoid
damage to balance
cords. Product failure
may result.
Interior