Instructions / Assembly

American Craftsman Installation Guide
2
Replacement Windows
888-504-0005 www.AmericanCraftsmanWindows.com
Project Requirements:
• Failure to follow these instructions may void
product warranty.
• Read guide before starting installation. Read
all warnings and cautions during installation.
• Due to ongoing product changes, updated test
results and/or new industry best practices,
this installation procedure may change over
time. Visit the manufacturer’s website for
current installation instructions.
• This product is designed to be used as a
replacement window installed into an existing
“old style” wood double-hung window frame.
• Installation must comply with all applicable
building codes.
• Existing window frame, wall and weather-
resistant barrier must be adequate and window
frame and wall must be structurally sound.
• Window must be installed to be plumb, level
and square.
• The replacement window should be
approximately 1/4" less in width and height
than the existing window opening once the old
sash and components have been removed.
Head expander can be used if up to 1/2" less
in height.
• Instructions are given for installation from the
interior of the building.
• Contact local authorities or waste management
companies for proper recycling and/or disposal
of removed window or patio door.
• Visit the manufacturer’s web site for removal
instructions, additional installation information
and/or guides.