Instructions / Assembly

American Craftsman Installation Guide
5
Replacement Windows
888-504-0005www.AmericanCraftsmanWindows.com
Warnings and Cautions:
Use masonry screw when fastening
directly into masonry or through a
buck into masonry.
Remove or cut ventilation holes in
plastic shipping wrap if window is
not installed immediately or product
damage may occur.
When insulating between unit frame
and rough opening or between units
when joining, DO NOT overpack
batt insulation or overll with foam.
Bowed jambs will result affecting
product performance and/or proper
operation of unit.
Do not apply any type of lm to glass.
Thermal stress conditions resulting in
glass damage could occur.
The use of movable insulating materials
such as window coverings, shutters,
and other shading devices may damage
glass and/or vinyl.
Follow instructions of foam, sealant
and ashing manufacturer regarding
material application and compatibility
with this product.
Weep holes must face the exterior and
must be located at the bottom of the
window or product and/or property
damage may occur.
Do not cover weep holes. Property
damage may result.
Do not store windows at or in the
sun or product damage may occur.
Buildings constructed prior to 1978
may contain lead paint which could be
disturbed during replacement. For more
information on proper management of
lead paint, visit www.epa.gov/lead
Important safety information. Leave
this information for the building
occupant.