Instructions / Assembly

Installation Instructions Installation Instructions
Questions: Call 800-234-4228 Questions: Call 800-234-4228
2-Panel Patio Door
with Non-Assembled Frame
2-Panel Patio Door
with Non-Assembled Frame
2 3
Transparency to
create outlines
Transparency to
create outlines
Tools & materials required:
Hammer and 2"
galvanized roong nails
(for new construction applications)
Slotted hand screwdriver Phillips hand screwdriver
Framer’s square Power driver and bits Caulking gun and Sealant
6' level Self-adhesive ashing,
at least 4" wide depending
upon installation
Shims
Measuring tape Work gloves Safety glasses
Step 1
2 Jambs
Sill & Sill cover
Head
Two door panels
Inspect door for
proper size and
condition, and
verify that all
parts are included.
Project Requirements:
• Instructions are for typical wood frame wall construction.
• Installation must comply with all applicable building codes.
• Depending on options purchased, this door was manufactured
for installation into either a new or existing door opening.
• Wall and sill must be structurally sound and weather-resistant
barrier must be adequate.
• Door must be installed to be plumb, level and square.
 •Doorshouldbeapproximately1/2"lessinbothwidthandheight
than the opening.
Two hardware bags, together containing:
Quantity Item
18 #8 x 2" Phillips Pan Head Screws
12 #8 x 2" Phillips Flat Head Screws
8 #8 x ¾" Phillips Pan Head Screws
6 #8A x
5
⁄8" Phillips Pan Head Screws
2 #8 x ½" White Phillips Truss Screws
2 Fixed Panel Clips
2 Sill Draft Plugs
2 Head Draft Plugs
1 Stopper Bracket
Hardware Included: