Instructions / Assembly

Installation Instructions Installation Instructions
Questions: Call 800-234-4228 Questions: Call 800-234-4228
2-Panel Patio Door
with Non-Assembled Frame
2-Panel Patio Door
with Non-Assembled Frame
4 5
Transparency to
create outlines
Transparency to
create outlines
Step 3
Step 4
Apply sealant and
fasten jambs to sill
and head.
Apply two 1/4" beads of
sealant to sill and 2" up
each side of rough opening.
2"
2"
New Construction: For Nailing Fin Applications
Apply sealant
over foam gasket
on jamb where it
will contact
the sill.
1
Fasten jamb to
sill with 3,
#8x2"athead
screws (included)
in each location
using pre-drillled
holes.
2
3
Repeat in other
3 corners. Make
sure tracks line
up.
Silver Line strongly recommends that you use a membrane or vinyl-
based sill pan to ensure a weathertight seal. Follow the sill pan
manufacturer’s installation instructions.
2"
Step 2
Inspect opening for
correct size. Opening
should be 1/2" larger
than the door size.
Be sure opening
is plumb, level
and square.
Correct size
Square
Plumb
Level
If using nailing
n, continue with
step 3. If nailing
n will not be
used, proceed
to step 11.