Instructions / Assembly

Installation Instructions Installation Instructions
Questions: Call 800-234-4228 Questions: Call 800-234-4228
2-Panel Patio Door
with Non-Assembled Frame
2-Panel Patio Door
with Non-Assembled Frame
10 11
Transparency to
create outlines
Transparency to
create outlines
Step 14
Step 16
Step 15
Fasten frame.
Attach frame to opening using #8 x
2"panheadscrews(included)inall
pre-drilled holes in head and jambs.
Apply interior and exterior trim.
Caulk the perimeter of interior
and exterior for a weathertight seal.
Remove roller assemblies
from bottom of moving door
panel by removing the
upper screws.
Remove screw and roller wheel
assemblies from both sides of
door panel.
Shim behind screw
holes so door is plumb,
level and square.
Take assemblies out
To Change Orientation of Operating Panel - Optional
(Move To The Left or To The Right)
If desired orientation of moving and xed panels is correct, move to
step 20. If other orientation is desired, proceed to step 16.
Interior
Exterior
Step 13
Place frame into
the opening from
the exterior. Place
sill of frame into
place, then tip
head into place.
Be certain narrow
screen track
is on exterior side.
Exterior