User Manual

ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 8

Starburst System Menu

System Menu: When making adjustments press ENTER to

conrm your setup. To exit without making any adjustments

press the MODE button. After 10 seconds, the display will

return to the DMX address setting. Your operating mode

will still continue to run despite the display showing the

DMX address setting. The display will lock after 30 seconds,

press the MODE button for 3 seconds to unlock.

AXXX - DMX Address Setting. See page 12 for more infor-

mation on DMX Control. To run DMX mode, you must rst turn

AUTO o. Please see AUTO below for instructions on how to

turn AUTO mode o.

1. Press the either the MODE button until “AXXX” is displayed,

“XXX” represents the current displayed address. Press ENTER.

2. Press the UP or DOWN buttons to nd your desired address.

Press ENTER to set your desired DMX address.

AUTO - Auto mode or Sound Active mode selection.

1. Press the MODE button until “AUto” is displayed, and press

ENTER.

2. Either “SoNd”, “AuOF” or “AUto” will be displayed. To activate

Auto Mode press the UP or DOWN button so that “AUto” is dis-

played, and press ENTER. Auto Mode will now begin to run.

3. To activate Sound Active Mode press the UP or DOWN button

so that “SoNd” is displayed, and press ENTER. Sound Active

Mode will now begin to run.

4. To turn AUTO mode o, press the UP or DOWN buttons so

that “AuOF” is displayed and press ENTER. Auto Mode will now

be o.

SOUS - Sound sensitivity adjustment.

1. Press the MODE button until “AUto” is displayed. Press the

ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 9