User Manual

Starburst System Menu Starburst System Menu
UP or DOWN buttons until “SoUS” is displayed, and press
ENTER.
2. Press the UP or DOWN buttons to adjust the sound sensitiv-
ity. Press ENTER when you have reached your desired setting.
ASTE - This will let you set the unit as a master in a
master/slave conguration.
1. Press the MODE button until “AUto” is displayed. Press the
UP or DOWN buttons until “AStE” is displayed, press ENTER.
Either “MAST” or “ALon” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to conm.
3. Press ENTER to conrm.
RDOF - This will “ip” the LED display 180º.
1. Press the MODE button until “AUto” is displayed. Press the UP
or DOWN buttons until “rdoF” is displayed, press ENTER.
2. Either “rdof” or “rdon” will now be displayed. To reverse the
display, press the UP or DOWN buttons so that “rdon” is dis-
played and press ENTER.
LOST - This mode can be used as a precaution mode, that
in case the DMX signal is lost, the operating mode chosen in
the setup is the running mode the xture will go into when
the DMX signal is lost. You can also set this as the operat-
ing mode you would like the unit to return to when power is
applied.
1. Press the MODE button until “AUto” is displayed. Press the UP
or DOWN buttons until “LoST” is displayed, press ENTER.
2. Either “bLAC” (blackout) or “hoLd” will be displayed. Choose
the mode you would like the unit to go into if a DMX signal is lost.
• Blackout - If the DMX signal is lost, the unit will automatically go
ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 10 ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 11
into stand by mode.
• Hold - If the DMX signal is lost the xture will stay in the last
DMX set up.
MANU - This function will let you manually control the
LED colors and motor.
1. Press the MODE button until “AUto” is displayed. Press the
UP or DOWN buttons until “MANU” is displayed, press ENTER.
2. Use the UP or DOWN buttons to scroll to the function you
would like to adjust and press ENTER.
3. Use the UP or DOWN buttons to adjust the values to your
selected function.
4. Press the ENTER button to conrm or the MODE button to
exit.
DFOF - Use this function to restore the unit to it’s factory
settings.
1. Press the MODE button until “AUto” is displayed. Press the UP
or DOWN buttons until “dFoF” is displayed, and press ENTER.
2. Either “dFoF” or “dEon” (default settings) will be displayed. To
restore to the factory settings, press the UP or DOWN buttons so
that “dFon” is displayed and press ENTER. Factory settings will
now be restored. If you wish not to restore factory setting, press
the UP or DOWN buttons so that “dFoF” is displayed and press
ENTER.
REST - Use this function to reset the motor.
1. Press the MODE button until “AUto” is displayed. Press the
UP or DOWN buttons until “rESt” is displayed, press ENTER.
2. The xture will now reset