User Manual

ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 14
Starburst DMX Values & Traits
Channel Value Function
10 COLOR MACROS
206 - 255 COLOR CHANGING FAST - SLOW
11 PAN/COLOR MACROS
0 - 55 NO FUNCTION
56 - 75 SOUND ACTIVE
76 - 105 RED CLOCKWISE ROTATION
106 - 135 BLUE COUNTER-CLOCKWISE
136 - 165 7 COLOR CHANGE CLOCKWISE
166 - 195 7 COLOR CHANGE
COUNTER-CLOCKWISE ROTATION
196 - 225 7 COLOR CHANGE WITH STROBE
CLOCKWISE ROTATION
226 - 255 7 COLOR CHANGE WITH STROBE
COUNTER-CLOCKWISE ROTATION
12 RESET
0 - 69 NO FUNCTION
70 - 85 RESET
86 - 255 NO FUNCTION
ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 15
Starburst Fuse Replacement
Starburst Cleaning
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 20 xtures maximum. After the maximum xtures
has been reached you will need to use a new power outlet. They
must be the same xtures. DO NOT mix xtures.
Starburst Power Cord Daisy Chain
The fuse holder is located next to the I.E.C. plug input. Using a phil-
lips head screwdriver, unscrew the fuse holder and remove it from the
unit. Remove the bad fuse and replace it with a new identical fuse.
Insert the fuse holder back into the unit and screw the holder in so
that is secure.