User Manual

American DJ® - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 10American DJ® - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 9
2. Tap the UP or DOWN buttons to scroll through 12 sound
active shows.
3. Select your desired show by pressing the ENTER button to
conrm and exit.
BLND - Blackout or Stand by mode.
1. Tap the either the MENU button until “BLND” is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to conm and exit. The xture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
LED - With this function you can switch the LED on or off
via the control board.
1. Tap the either the MENU button until “LED” is displayed,
press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to switch on the LED, or “OFF” to
switch off the LED.
3. Press ENTER to conrm and exit.
I DSP - This function will reverse the display 180º.
1. Tap the either the MENU button until “I DSP” is displayed,
press ENTER.
2. Tap the UP button until “FLIP” is displayed.
3. Press ENTER, the display will show “ON/OFF”.
4. Press the UP button to select “ON” to activate this function,
or “OFF” to deactivate this function.
5. Press ENTER to conrm.
Quad Gem DMX™ System Menu
FHRS - With this function you can display the running time
of the unit.
1. Tap the either the MENU button until “FHRS” is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER - Use this function to display the Software version of
the unit.
1. Tap the either the MENU button until “VER” is displayed,
press ENTER.
2. The display will show the software version.
Quad Gem DMX™ System Menu