User Manual

ADJ Products, LLC - www.adj.com - Monster Beam User Manual Page 3
• 25 x 1W LEDs
• Color Strobe Effect
• Built in Microphone
• DMX-512 protocol
• 1 DMX Channel
• 3 Operating Modes - Sound Active, Show Mode, or DMX Control
• UC3 Remote Control Compatiable (Not Included)
• Power Cord Daisy Chaining (See Page 14)
Monster Beam Warranty Registration
The Monster Beam carries a 3 year (1095 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www.
americandj.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact ADJ Products, LLC
customer support for a R.A. number.
Monster Beam Features
To optimize the performance of this product, please read these operat-
ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
Monster Beam General Instructions
Monster Beam Introduction
ADJ Products, LLC Supply - www.adj.com - Monster Beam User Manual Page 2
Unpacking: Thank you for purchasing the Monster Beam by ADJ
Products, LLC. Every Monster Beam has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your xture for
any damage and be sure all accessories necessary to operate the unit
has arrived intact. In the case damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Do not return this unit to your dealer without rst con-
tacting customer support.
Introduction: The Monster Beam is part of ADJ’s continuing pursuit
for creating high quality affordable intelligent fixtures. The Monster
Beam is a high performance, DMX intelligent, LED moonflower fixture.
This unit can be used as a stand alone unit, or in a Master/Slave cong-
uration. The unit has three operating modes; sound active, show mode,
or controlled via DMX controller. This fixture is a great piece for retail
stores, displays, mood, architectural, interior and exterior decoration,
and clubs. This fixture is suitable for theaters, studios, retail stores, and
other similar locations.
Customer Support: ADJ Products, LLC provides a toll free cus-
tomer support line, to provide set up help and to answer any question
should you encounter problems during your set up or initial operation.
You may also visit us on the web at www.adj.com for any comments
or suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.
Monster Beam Installation
The unit should be mounted using a mounting clamp (not provided),
afxing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is rmly xed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit’s weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the xture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.