User Manual

ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 14
PINT - Pan Inversion
1. Press the MENU button until “PINT” is displayed, press
ENTER. Either “Yes” or “No” will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons
until “Yes” is displayed, press ENTER to conm. To deactivate
Pan inversion, select “No” and press Enter.
TINT - Tilt Inversion
1. Press the MENU button until “TINT” is displayed, press
ENTER. Either “Yes” or “No” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons
until “Yes” is displayed, press ENTER to conm. To deactivate
tilt inversion, select “No” and press Enter.
LED - With this function you can have the display back-
light turn off after 10 seconds.
1. Press the MENU button until “LED” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at
all times, or “OFF” to switch to have the LED display switch o
after 10 seconds.
3. Press ENTER to conrm. To make you LED display reappear
again press any button.
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press
ENTER.
2. Press ENTER to “ip” the display. Press ENTER to “ip” it
Inno Pocket Z4 System Menu
ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 17
Inno Pocket Z4 Home Adjustment Menu
To enter the home position adjustment menu, press the
ENTER button for at least 5 seconds. In this submenu you are
able to adjust the original position of the pan position and tilt
position.
PAN - Adjustment of the pan position.
1. Press the ENTER button for at least 5 seconds, then press
the UP or DOWN buttons so that “PAN” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to make your adjustments,
and then press ENTER to conrm. Press the MENU button for
one second to exit.
TILT - Adjustment of the tilt position.
1. Press the ENTER button for at least 5 seconds, then press
the UP or DOWN buttons so that “TILT” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to make your adjustments,
and then press ENTER to conrm. Press the MENU button for
one second to exit.